Call restriction in Cisco Call Manager

For solving problems related to call restriction in term of "you can call international countries and you can't, you can call only local numbers etc" the best way in call manager configuration is to use calling search space. Following are the basic steps included in this kind of configuration:
- define Partition (Class of Control-->Partition...) with appropriate name INT, LOC for example
- define calling search space and join predefined partitions that are already created
- in Route pattern join adequate partition to it
- in Device under local number define calling search space that is already created
That's it...it should work now...

Comments

Post a Comment

Popular posts from this blog

NSX ALB LetsEncrypt with DNS-01 challenge - BIND example

    In some of my previous posts, mentioned here LetsEncrypt script integration and Script parameter usage , I explained how useful it can be for NSX advanced load balancing solutions to utilise this kind of approach for free and automatic certificate manipulation, especially in environments with large number of web services inside. This approach utilises HTTP-01 based challenge with LetsEncrypt systems and L7 HTTP/S virtual services on NSX ALB side.     Now, from some time ago there is enhancement in this area, developed by official Avi Networks devops page, in terms of using DNS-01 challenge also. I tried on-prem option using Bind DNS as server which works very well.     Steps are pretty much similar to HTTP-01 option, which can be summarised as following:      - Create L7 virtual service with publicly available FQDN - certificates resolved can be in both options RSA or ECDSA, as configured during creation;        - Download required DNS-01 challenge script HERE      - Useful help
Read more

NSX ALB routing - multiple floating IP and BGP setup

Image
     Recently, I had very interesting scenario around NSX ALB (ex Avi Networks) setup with multiple networks, NAT's and no-NAT's, but more important routing requirement inside Customer environment. As you are aware of - NSX ALB Service engines have multiple NICs - to be more accurate there are 1 management + 9 data interfaces, which can be used with different configurations depending on actual needs and infrastructure. In my specific case, there were following assumptions which were successfully deployed across virtual service configuration: - external network (from NSX ALB perspective) - based on Cisco ACI SDN solution, where basically different L3-outs (specific ACI setup) for multiple NSX ALB needs were configured directly on Cisco platform. For this purpose, we will introduce VRF named XYZ, specifically created for connections mentioned above; - there is a need for multiple floating IP + BGP config in place on NSX ALB SE's, which can be found on this link  Default Gatew
Read more

VMware SD WAN - multiple locations - LAN IP address space overlapping with NAT

Image
     Different scenarios are possible in terms of routing, NAT-ing and IP overlapping setups using VMware Velocloud SD WAN technology in Customer environments.      Recently I had an PoC with my Customer for the on-prem option with this VMware solution, where different use cases were interesting to show and demonstrate - one of them is something I would like to share and it relates to possibility of LAN-side NAT on Edge (branch) locations, with purpose to have IP overlapped on these setups. Next picture is showing typical Hub&Spoke setup where it can be possible to make this type of configuration: Picture 1. VMware SD WAN lab on-prem environment     Basically thing which needs to be accomplished is appropriate NAT solution for LANs on every branch Edge which are and needs to be the same (192.168.1.0/24 in this example) - as it is shown on Picture 1.      Honestly speaking, NAT is not one of so powerful things inside Velocloud SD WAN solution, if you compares it to traditional netwo
Read more